Dye has bled on your quilt - what now?

When a quilt with red, black, purple or dark blue fabric has bleeding of colors it can ruin a perfectly good quilt.  Synthrapol is a solution to fixing the problem!  

The first thing I'd like to do is have you watch a youtube video by Rob from Man Sewing. 

This video teaches how Synthrapol works, and it's important to learn this before 

you try using Synthrapol the first time.

Note: I have you starting the video in the middle.

Synthrapol is a neutral detergent.. The neutral pH means it is good for taking care of the excess dyes.  All laundry detergents and dishwashing detergents, such as Dawn, are high pH and as a result you need multiple cycles of washing to get all the excess dyes out. They don't work all that well, frankly.

Rob gave very good information about how to use Synthrapol.  (The first half of the video talks about how to use Retayne, it's good information too!)  But he doesn't give information on how to remove excess dyes from a big 'ol quilt.

For a top loading washer:  

Add the quilt and the Synthrapol.  Use one teaspoon for every gallon of water... 1/2 cup (4 ounces) will go into 20 gallons, which is the typical amount a washer holds.
The water in the washer must be hot, raise the temperature of your hot water heater temporarily so it's plenty hot.  Let it run through a cycle, agitation is important here... and use a warm water rinse. A second warm water rinse wouldn't hurt.

Check the fabrics to make sure the dye was removed.  Do not dry the quilt in the dryer until all the excess dye has been removed.  If you still see excess dye, simply repeat the wash cycle again.

For a front loading washer:

Because of the small amount of water used in a front loader, a front loading washer is not recommended.  You should go to a laundry mat in that case, or visit someone who has a top loader.

Note: this post was originally posted in 2019.  It's being repeated now since it's good information!